Hello Experts
What are the important parameters to check if the ENDC is enabled correct or not ?
Vendor is Nokia.
Below are the MOs to check EN-DC parameters for Nokia.
I’ve wrote down the description for each MO, you can check the parameters in them and lookup the description in the parameter sheet. Hope this helps.
|ENDCDMEASCONF| Measurement B1 for NR|
|ENDCMEASCONF| Measurement B1 for NR (ENDC interworking|
|LNADJGNB| Site-Site definition 4G to 5G|
|LNBTS| Site Level Information LTE|
|LNCEL| Cell Level Information LTE|
|LNRELGNBCELL| Cell- Cell Def (4G to 5G)|
|LNRELGNBCELL_1| Cell- Cell Def (4G to 5G)|
|LNRELGNBCELL_2| Cell- Cell Def (4G to 5G)|
|LTEENB| 5G MO - 4G anchors definition on 5G (site level)|
|NRADJNRCELL| 5G site to Nbr 5G cell relations|
|NRBTS| Site Level Information 5G|
|NRCELL| Cell Level Information 5G|
|NRDCDPR| 4G cell informations - ENDC capability|
|NRDCPR| 4G cell informations - ENDC capability|
|NRHOIF| 5G - 5G HO Thresholds|
|NRREL| 5G - 5G Relations|
|NRREL_1| 5G - 5G Relations|