Creating External UTRAN and EUTRAN cells in Ericsson Networks

OSS and NOC
,
1

Hello Ericsson Experts,

I used the following script to create an External UTRAN Cell FDD:

crn ENodeBFunction=1,UtraNetwork=1,UtranFrequency=3088,ExternalUtranCellFDD=6181-108-40083
cellIdentity cId=40083,rncId=108
isRemoveAllowed true
lac 30020
lbUtranCellOffloadCapacity 1000
masterUtranCellId
physicalCellIdentity 26
plmnIdentity mcc=618,mnc=1,mncLength=2
rac 20
rimCapable 0
srvccCapability 1
userLabel
zzzTemporary1 -2000000000
zzzTemporary2 -2000000000
zzzTemporary3 -2000000000
zzzTemporary4 -2000000000
zzzTemporary5 -2000000000
zzzTemporaryExt1 -2000000000
zzzTemporaryExt2 -2000000000
zzzTemporaryExt3 -2000000000
zzzTemporaryExt4 -2000000000
zzzTemporaryExt5 -2000000000
end

Now, I’d like to create an External EUTRAN Cell FDD using this command: ENodeBFunction=1,EUtraNetwork=1,ExternalENodeBFunction=6181-4090,ExternalEUtranCellFDD=6181-4090-21.

However, I’m unsure about the parameters to define. Could you please assist?

2

Hi, do you have any other ExternalEUtranCellFDD in any other RBS? If so, use simulated mode:

u+s
del ExternalEUtranCellFDD=ANYOTHER
u-

Modify the resulting command file as needed.

1 Like
3

Be careful. Parameters may be different from co-sector cells and the others ones.
And between operators, if RAN sharing